Loading Top Roll
Step 1
Open dispenser cover.
Step 2
Pull down roll divider and insert roll into blue roll holders.
Step 3
Guide end of towel into blue paper loading area. The rollers will automatically engage & finish loading the towel.
Loading Bottom Roll
Step 1
Open cover if need, and insert roll into green roll holders.
Step 2
Guide end of towel into green paper loading area. The rollers will automatically engage & finish loading the towel.
Step 3
Close cover.
Dispenser Settings
Towel Settings
Sheet Length
Sheet length may be adjusted to a short, medium, or long setting
Sheet Feed Button
Sheet feed button is used to advance a towel while loading. Blue is for top roll. Green is for bottom roll.
Sensor Range
Sensor range adjusts distance from hand to dispenser for motion mode dispensing
Time Delay
Time delay allows towels to dispense at variable time intervals after a towel is taken from dispenser
Motion Mode and Auto Supply Mode
This Button toggles between Motion Mode, Motion Mode + ECON, and Auto Supply Mode.
Motion Mode
Motion mode requires the user to wave hand to dispense towel. Activated when hand wave is on.
Auto Supply Mode
Auto supply automatically supplies a towel after a towel is taken. Activated when hand wave is off.
Dispenser Lights
These lights communicate different statuses that the dispenser is in.
Low Battery
Red light flashes slowly when battery is low. Light flashes quickly when battery is very low.
Paper Jam
All three lights flashing indicate paper jam.
Low Paper
Red light blinks when one roll is depleated. Light blinks quickly when both rolls are depleted.
Battery Loading
Step 1
Use key to open front cover and remove towel roll(s) if needed.
Step 2
Open battery cover and remove depleted batteries. Insert four new D-cell alkaline batteries.
Step 3
Close battery cover, reload towel roll(s) and close cover.
Battery Care and Disposal
1.
Keep in original packaging until ready for use.
2.
Remove battery from device when not in use for an extended period of time.
3.
Never disassemble battery. Chemicals inside battery can be dangerous if swallowed or exposed to skin.
4.
Avoid mechanical or electrical abuse.
5.
Keep away from children.
6.
Battery is not designed to be recharged.
7.
Avoid extreme temperatures.
8.
Do not incinerate, since battery may explode at excessive temperatures.
9.
Do not dispose of large amounts of batteries as it creates a safety risk.
10.
Dispose of accumulated batteries in accordance with appropriate federal, state, and local regulations.
11.
Do not mix old and new batteries or nonrechargeable and rechargeable batteries.
12.
Rechargeable batteries are not recommended.
